Chonry Peristaltic Pump
CR BP600 Peristaltic Pump Flow Rate 700ml/min
Description:
BP600 small peristaltic pump is a type of OEM product. It adopts the stepper motor or DC brush motor, a more stable fluid. The flow rate of the BP600 peristaltic metering pump is up to 700ml/min. It is widely used for laboratories, medical equipment, and water treatment industries. Compact size and high quality reach the precision fluid transfer. As the peristaltic pump manufacturer, Chonry provides you with the best price for a peristaltic pump.
Features:
- The spring compensation structure can prolong the service life of the pump pipe, prevent the liquid backflow and the negative pressure is stable
- Gear transmission, long life low noise
- Double bearing transmission, long life, maintenance-free
- Strengthening engineering plastics, high strength, stable performance
- Transparent shell, visible work, beautiful and generous
-The direction of the pump pipe can be switched at will
- Imported pump pipe, good chemical resistance
Parameter
Product Model | BP600 |
Motor | stepper motor or DC brush motor |
Voltage | 12V/24V |
Flow rate | 0-700ml/min |
Pressure | Low Pressure |
Material | PC+PA66 |
Noise | <65dB |
Pump tube material | Silicone tube |
Customized Support | OEM, ODM, Software reengineering |
Performance and Flow Parameter Table of Pump Pipe
Code/Material of Pump Pipe | Performance Characteristics | Pump Tube Life |
Norprene Tube | Meeting the FDA certification and is very suitable for food and dairy products. Heat and ozone resistance, acid and alkali resistance, anti-aging, oxidation resistance, long life. | >1000h |
Silicone Tube | Low cost, weak acid and alkali resistance, chemical corrosion resistant worse than the above NP pump pipe, service life is lower than NPpump pipe. | >200h |
Flow Parameters
Pump pipe code | S32 | S40 | S48 | N32 | N40 | N48 | ||
ID x OD | 3.2 x 6.4 | 4 x 7.2 | 4.8 x 8 | 3.2 x 6.4 | 4 x 7.2 | 4.8 x 8 | ||
Tube material | Silicone Tube | Norprene Tube | ||||||
Flow-rate ml/min | 24V DC | 0.3A | 320 | 500 | 660 | 320 | 500 | 660 |
12V DC | 0.6A | 320 | 500 | 660 | 320 | 500 | 660 | |
Ideal working conditions: ambient temperature 0-40℃, relative humidity <80% | ||||||||
Note:
1. Test method: normal temperature(20℃), Pure water test under normal pressure;
2. The above data is for reference only, and the flow rate will have deviation according to different liquid, pressure and pipe length
3. Pump pipe material, flow rate and control mode can be customized according to requirements.
- Motor type:
- stepper motor or DC brush motor
- Flow range:
- 0-700ml/min
- Power Supply:
- 12V or 24V
